Skip to product information
1 of 1

M&C Parts

Bonnet Safety Catch, Plunger & Spring Kit Ford XB Falcon - BCK2002

Bonnet Safety Catch, Plunger & Spring Kit Ford XB Falcon - BCK2002

Regular price $119.96 AUD
Regular price Sale price $119.96 AUD
Sale Sold out
Tax included.

A bonnet that sits neatly and latches securely makes a real difference to both presentation and safety. This Bonnet Safety Catch, Plunger & Spring Kit is suited to Ford XB Falcon models, and provides the upper latch hardware fitted to the front underside of the bonnet. It works with the lower radiator support catch to hold the bonnet closed, assist release and provide a vital secondary safety catch.


  • Complete Upper Bonnet Latch Hardware: Includes a hooked bonnet safety catch lever assembly, tapered plunger pin, conical pop-up compression spring, flanged fender washer, threaded hex locking nut, and two safety-catch mounting bolts with pre-fitted lock washers.

  • Adjustable Bonnet Alignment: The tapered plunger pin screws into the bonnet and can be adjusted vertically to help align the bonnet with the guards. Once set, the pin engages the lower latch when the bonnet is closed.

  • Positive Release And Secondary Safety Catch: The hardened conical spring pushes the bonnet upward slightly after the interior release cable is operated, while the pivoting safety hook retains the bonnet should the primary latch release unexpectedly.

  • Long-Lasting Performance And Protection: Heavy-gauge structural steel is used for the catch assembly, washer and nut, with a high-tensile machined steel plunger pin and hardened high-carbon spring. gold/yellow zinc chromate finish for resistance to engine-bay heat, moisture and oil and corrosion, while the mounting bolts feature a dark anti-corrosion oxide finish.


  • Fitment Guide

Position the safety catch on the bonnet.

Secure the safety catch to the bonnet using the two bolts.

Fit the bonnet pin into the nut in the bonnet.

Install the washer and nut onto the bonnet pin.

Fit the spring over the pin, with the tapered end sitting against the back of the tapered pin head.

Adjust the pin shaft in or out until the bonnet sits level with the guards.

Tighten the lock nut on the thread to hold the bonnet pin securely in position.


The Bonnet Safety Catch, Plunger & Spring Kit is an ideal replacement for worn, missing or corroded upper bonnet latch components, helping restore secure closure, smooth release and dependable safety-catch operation.


View full details